Perth Petroleum Services Oil & Chemical Spill Equipment

Description

Prevent silt and solids from entering waterways via stormwater drains.

• Trap is placed below the grate to prevent damage in high traffic areas.
• Sediment trap is made from 200micron geotextile fabric.
• Helps spill control compliance to avoid costly fines.
• Excess flow points avoid blockage during periods of high water fall.
• To install, place the drain warden into drain and cut off excess fabric leaving a healthy border. Excess fabric may also be folded over the drain.
• Warden should be checked after rainfall for silt and debris.
• This drain warden is to capture silt and debris only. No absorbents are included. 
• Drain should be no larger than one square metre.

Shipping weight: 1 kg

Dimensions: 1.2m x 1.2m

Made in Australia

The excess fabric is being removed around the grate of the storm water drain.

Cable ties can be used to secure the drain warden to the grate to prevent it from falling into the drain when grate is lifted.